Wired indoor siren with 2 sound levels
Call for price
70253010
Wired siren for indoor use. The siren can be set to emit a loud sound approx. 97 dBA - consumption 100mA or low sound approx. 87 dBA - Consumption 30mA.
ATTENTION! Extra reduced, as the tamper switch is loose in some units and can be torn loose when opening the unit. The contact can be repaired/fixed again. The siren works without the tamper switch, but the tamper function will not work.
Wired siren for indoor use.
The siren can be set to 2 volumes:
- High approx. 97 dBA. - Consumption 100mA
- Make approx. 87 dBA. - Consumption 30mA
Our control panel (SSI300 or SSI400) can draw up to 300mA.
To select sound level:
- If a loud sound is desired, connect +HI and -GND
- If low sound is desired, connect +LO and -GND
If it is to be connected to the FC-300/SSI 300/SSI 400, the cables must be mounted as follows:
- GND to BELL-
- +HI to AUX+
The device requires a 12V power supply (not included).
There is no reviews yet. Be the first to write us your opinion
