Intercom for 10 apartments

Intercoms are for use in apartment buildings with up to 10 apartments. note that at least 3 floor modules, 1 power supply and 10 telephones must be purchased - of your choice.

It is a recessed model for wall mounting by the front door/entrance. The intercom is placed in an accompanying box, so that you can take it out and gain access to the back of the intercom.

Residents' and guests' access

Residents can open the front door using a card or traditional key.

Guests call the apartment in question by pressing its call button. The apartment's monitor or doorphone then rings and the resident can talk to the guest and unlock the front door and give access to the staircase.

Card programming

Cards are programmed via the built-in contactless reader and the included keyboard.

The keyboard is connected to the intercom via a connector on the back of the intercom.

The code keypad can be mounted on a wall or it can be connected to the intercom when programming is required.

Size of keyboard: H 115 x W 75 x D 15 mm.

For further information see the Danish instructions below.

Specifications

• 
  
• Intercom with color camera
  
• 10 direct call buttons
  
• 125khz contactless reader
  
• Keyboard for use when programming cards is included.
  
• Supply: 12-15VDC
  
• Camera 1/3" CCD
  
• Resolution: 420TVL
  
• Submerged model
  
• Material: Aluminum
  
• Size: H 370 x W 145 x D 55 mm.
  

Guide to programming cards

Instructions for installing and replacing nameplates

Manual (English)

Programming cards/codes