GSM access control WIGI

WIGI access control for control via phone call, SMS, proximity chip and keyboard 1000 PIN codes, 100 users phone call ID, 5 master users, 1,000 events.

Programming via USB included Easyset software. Codes are programmed via software or SMS or via app GPRS.

Eg. you can easily activate the output with the SMS command:

;ORC1=1; (you can also use ;ORC1=ON; Then the output turns on either ON or as timed - depending on what the output is set to.

;ORC1=0; ( ;ORC1=OFF; ) then the output is deactivated.

Proximity Wiegand 26 bit chips or cards can be used for external keyboard/chip reader, e.g. 20001621 or only chip reader 30007013

• 1,000 user PIN codes
• 100 users via phone call ID
• 5 master users for access and programming
• 50 SPIN (temporary passwords)
• 1,000 events that can be displayed via software or SMS
• 1 piece. relay output for gate/door opening
• 12 - 24VDC
• Additional accessories: SIM card 3G, Power supply and Proximity reader 26 bit.
• 3G compatible.

Note SPIN - Temporary Passwords

New function (SPIN) makes it possible to create up to 50 temporary passwords, each of which can be individually set for how many times they may be used.
For example, code 4321 and 5 entries, after which the code is deleted. (Can be programmed/encoded via SMS)

This can be suitable for places where people only need access x number of times.

SMS commands that can be handy:

Ask about the time ;psys;

ask for time synchronization time sync

Reset ;ssres;

Check signal ;psq;