GSM Control Module users

Call for price
70253010

By:
Model: 60000200
Availability: In stock

GtAlarm2 GSM Control module with digital and analogue inputs/outputs 800 users, the GSM module has many different applications within security, automation and access control. The control unit is equipped with 4 analog inputs, 4 analog outputs, 2 programmable analog inputs/outputs and 3 programmable digital inputs/outputs. It is possible to create up to 800 users. Supplied as a printed circuit board for installation without power supply. Use our smart, free app for remote control with your Android/iPhone mobile phone.

Link to software

Application

The GSM module can, among other things, used for:

  • alarms in connection with too high/low water level in e.g. a well or cellar
  • open/close gate or electronic door lock via SMS, call or app.
  • burglar alarm
  • heating/cooling control - switch heating or air conditioning/air conditioning on/off via SMS, call or app.
  • Voltage monitoring - alarms in case of 230VAC failure or low battery.

The module can be programmed via free, included software for PC, or via SMS.

Additional purchases

Remember to purchase an antenna, power supply and possibly a box to keep the equipment in. See the "accessories" tab.

App for operating the GSM transmitter

Like our other GSM products, this can be controlled using our smart, free GSM App, which can be downloaded either via Google Play or the App Store .

Specifications

GSM:

  • Quad band (850/900/1800/1900 MHz).
  • Send and receive SMS.
  • Make and receive calls.
  • Data input and output via GPRS network.

Outputs (PGM)

  • Out1 maximum current (-V): 1000mA.
  • Out2 maximum current (-V): 1000mA.
  • Out3 maximum current (-V): 1000mA.
  • Out4 maximum current (-V): 1000mA.

IN1 – IN4 inputs:

  • SMS for entry alarm and recovery.
  • Control up to 32 sensors.
  • Programmable activation and deactivation.
  • Alarm zone input type NC/NO/EOL +TAMPER 2.2K.
  • 5.1K pull resistor.
  • Algorithm for zone operation, delay, home arming, immediate activation, 24 hours, silent and fire.
  • Analog sensor control.

Inputs/Outputs I/O1 – I/O2:

  • Programmable input or output.
  • Alarm zone input type NC/NO/EOL +TAMPER 2.2K.
  • Analog 0-10V/0-20mA/4-20mA.
  • Analog sensor control.

Digital inputs/outputs D1-D3:

  • Programmable digital input or output.
  • Maximum voltage 3.3VDC.
  • Dallas 1-wire bus, DS18b20, DS1990A.
  • Aosong 1-wire bus humidity sensor AM2302, DHT22, AM2305, AM2306, AM2320 and AM2321.
  • Wiegand interface DATA0/DATA1, RFID reader and code keyboard.
  • Bus length from 10 to 100m.

Activate/deactivate the system:

  • Key switch input level or impulse.
  • SMS message 800 users.
  • Dialing 800 users.
  • Maxim-Dallas i-button key (ibutton DS1990A-64bit ID) 800 users.
  • Wiegand code keyboard or RFID key card/chip 800 users.

3.3V external output:

  • Voltage 3.3VDC.
  • Maximum current 100mA.

Bus extension:

  • Voltage 8-15VDC.
  • Maximum current 20mA.

Automatic test:

  • SMS message from 1-99 days.
  • Interval messages from 1- 99999 minutes.

Power supply

  • Voltage from 8 – 15VDC.
  • Nominal voltage 12.6VDC.
  • AC ripple voltage maximum 100mV.

Power consumption:

  • Sleep mode - less than 50mA.
  • Maximum current consumption 300mA.

Event log

  • Up to 2048 events.

Environmental parameters:

  • Storage temperature - from -40°C to +85°C.
  • Operating temperature – from -30°C to 75°C.
  • Maximum relative humidity below +40°C 95%.

Dimensions:

  • 86x66x18mm

There is no reviews yet. Be the first to write us your opinion

Add review:
spacer