Code keyboard with mifare read

Combined Mifare reader and code keyboard with push buttons. The keyboard is equipped with a blue background light and key sound.

Application
Robust model, the code keypad is waterproof (IP 65) and therefore suitable for both indoor and outdoor installation.

Users
Up to 1000 users on relay 1 - green LED.
Up to 10 users on relay 2 - red LED.

Access via card/tag or code
Relay 1 and 2 can be programmed for the following 3 types of access:

• Only access with card/tag
• Access with card/tag or personal code
• Access with both card/tag and personal code (combined access)

The code keyboard can be entered with a code of any length between 2-6 digits. As standard, you can choose to use a code or card/chip. If you choose to use combined access, all users will have to use both code and card/chip to gain access.

The device registers cards and chips at a reading distance of up to approx. 5-10 cm.

Can operate as ON/OFF or timer
ON/OFF: you have to read the card/tag or enter the code to open the door, and then read the card/tag or enter the code again to lock the door.

Timer: The lock's activation time can be programmed to 1-99 seconds, after which the door locks automatically.

Guidance

Dimensions
H 120 x W 76 x D 22 mm.

The cable coming from the keyboard is grey, 90cm. long and contains 12 conductors.

Operating temperature
-20 to 50°C

Supply
12-24VDC

Spending
80-100mA

Color
Black