Lock with DIN cylinder for swing doors and general. doors - tulip trap
Lock for swing doors - tulip trap, 12-24 DC/AC
With DIN cylinder and twister.
This lock is suitable, among other things, for swing doors, when the door position latch is pressed in (door closed) the lock latch becomes rigid.
You decide for yourself whether the lock should be unlocked with power or the other way around (mechanical switching).
Front plate/locking plate and trap are all made of stainless steel 304 and can hold the equivalent of 450kg.
Connection 12-24VDC/AC on red+ and black- wire.
Lock feedback on Yellow (NC) White (COM) Green (NO)
Front plate (oval): 274x25mm - thickness 3mm
Hole for lock: 230x47 + possibly 3mm more if the front panel is to be lowered into the frame/door.
Bracket: 150x30x2mm (the trap sticks 11mm into the bracket +2mm for its own thickness.
1 set of brackets is included if either bracket or lock is to be mounted on the plate.
12volt: 230mA / 24Volt: 160mA
Lock box is produced in zinc.
Weight 0.8 kg.
Can of course also be installed in doors that only open one way.
There is no reviews yet. Be the first to write us your opinion