MW/PIR intelligent detector for outdoor use
Intelligent MW/PIR intrusion detector for outdoor mounting.
MW/PIR intelligent infrared motion detector for wired alarm systems. This sensor is suitable for outdoor mounting as it is water-proof and can operate in a temperature range of -10 to 50 degrees celcius.
The detector comes with three different lenses; wide-angle lens, long distance lens and fence lens, which is ideal for use in corridors or small passageways. The sensors detection range varies from 15 - 23 m / 49,2 - 75,5 ft. depending which lens is used.
The sensor is set to be pet immune up to 20 kg./45 lbs. which means that cats, foxes , smaller dogs etc. wont trigger false alarms.
The detector has a LED indicator, that shows if it detects movement. This indicator is easily turned on and off. It also has a built-in tamper sensor that makes it impossible to remove the sensor from the wall without an alarm being triggered. Furthermore, the sensor has a antimasking function which means that the alarm will be triggered if an intruder should try to cover the sensor.
The ideal place to install the sensor is on a wall and 2.0 - 2.4 m. / 6.5 - 7.8 ft. above the ground. It can't be mounted with the sensor pointing against metal or in direct sunlight, as both will inrease the risk of triggering false alarms.
The unit requires a 9V-16V DC 65 mA power supply.
Dimensions of the sensor:
H 220 x W 110 x D 120 mm. / 8.66 x 4.33 x 4.73 in.
Dimensions of the mounting bracket:
H 95 x W 85 x 65 mm. / 3.74 x 3.35 x 2.56 in.