Voltage control monitor 12V
    Voltage control monitor 12V

    Voltage control with relay 12V

    Product No.: 41000275

    This product can monitor power supplies and disconnect battery backup before the battery becomes completely flat or just notify external equipment of errors.

    kr160.00 Tax included

    kr128.00 tax excl.

    Quantity

    In stock, 1-2 days delivery

    This product can monitor power supplies and disconnect battery backup before the battery becomes completely flat. Can also be used to activate the relay at too low voltage level, thereby notifying external equipment that the power supply is coming down.

    You can also ask the relay to activate within, for example, the 3-5 volts (functions 4 and 5).

    Supply : 12vdc +/-10%

    Measuring range : 0-99.9volt

    Function 1 : voltage gauge only

    Function 2 : relay activate at X volt and disables at Y volts

    Function 3 : relay disables at X volts and activates at Y volts

    Function 4 : only within the voltage range X-Y, the relay is active

    Function 5 : outside the voltage area X-Y is the relay active.

    Note, in the programming are P1 = X and P2 =Y.

    With P3 you can adjust the voltage that the device measures (calibrates).

    User's Guide (UK)

    If you need a module that can be connected to 24-28 volts, write or call for more information.

    Ex. on programming, relay must draw at less than 12.2 volts. (F4 P1=12.2 P2=00.0)

    • hold SET down
    • When it's in menu, tap SET once more
    • Press SWI 4 times to go to function 4
    • Press SET
    • Press SWI - Switch to voltage range 1 - P1 (when to release relay)
    • Press SET
    • Use the +/- keys to adjust up and down, change character with the SWI key
    • Press SET
    • Press SWI - switch to voltage range 2 - P2 (when relay pulls)
    • Use the +/- keys to adjust up and down, change character with the SWI key
    • Press SET
    • Use the +/- keys to adjust up and down, change character with the SWI key
    • Hold down the SET key to leave menu
    • If necessary, press

    If the voltage meter does not match your voltmeter, in P3, adjust the voltage.

    Size: L: 68 mm x H: 45 mm x B: 20 mm

    41000275