RF receives 1 channel

The unit is controlled via rf 433 MHz remote control, it is not included but can be purchased as 26000998.

Specifications:

• Input voltage: 10-14VDC
• Standby usage: <5MA
• RF Frequency: 433MHZ
• RF system: Super heterodyne receiver
• Receiver sensitivity:> 90dBm
• Remote range:> 100 meters (in open environment)
• Decoding Way: MCU Software Decoding
• Number of remote controls: 50
• Support remote type: Fixed code, bouncing code
• Channel: 1 channel relay
• Working methods: (Pulse / Changing, ON/OFF / Self-hold, with hours 05 / 10 / 15 sec.)
• Coupling method: Fixed screw terminals
• Work voltage: 12VDC
• Output relay maximum consumption: 10A
• Calculated load: 10A 250VAC / 10A 125VAC / 10A 30VDC / 10A 28VDC
• Exit: Usually open, Common, Usually closed
• Dimension: 3.5cm * 3cm * 1.6cm

Programming:

Function 1 : the relay holds while the button is pressed :

Press the receiver's waiting light button once, then press the desired remote control button.

Function 2 : the relay switches ON/OFF each time you press the remote control button :

Press the receiver's waiting light button in the LED, then press the desired remote control button.

Function 3 : relay changes ON/OFF, 1 button is ON another is OFF (you choose yourself)

press 3 times on the receiver's waiting light button in the LED, then press the desired remote control button to run ON and then the look should be the OFF button.

Function 4 : the relay activates for 5 seconds each time you press the remote control button:

Press the receiver's waiting light button once, then press the desired remote control button.

Function 5 : the relay activates for 10 seconds each time you press the remote control button:

Press the receiver's waiting light button in the LED for 5 more time, then press the desired remote control button.

Function 6 : the relay activates for 15 seconds each time you press the remote control button:

Press the receiver's waiting light button once again, then press the desired remote control button.