Repeater in 433MHZ to 2 channel receiver (item no. 2600.0975) and 4 channel wireless receiver (item no. 2600.0980), as well as 4 channel receiver (item no. 2600.0978) and wireless receiver with 4 relay outputs (item no. 2600.0982).
The device must be connected to a 12V adaptor (not included). An indicator on the front of the repeater lights up when power is connected.
Factory tests indicate that there must be longer between the receiver and the repeater (about 500 m.), while the distance between remote control and repeater must be shorter (about 100 m)
The device measures
Unit:H 12.5 x B 7 x D 3 cm Antenna: L 15.5 cm.
Others also bought
Reference : 20003190
Power supply 12V 5A for camera surveillance socket.
Reference : 41000206
Power supply 12VDC 1.3A module for installation. Dimensions: H 60 x B 86 x D 35 mm.
Reference : 25005135
Water level alarm for floor assembly. To 12VDC. Relay output gives NC or NO signal when there is water on the floor.
Reference : 26000999
RF transmits to remote control. Activated with 12VDC. Compatible with 2600.0982 and 2600.1001 RF receivers.
Reference : 20000881
3dBi GSM antennas with 3 meter cord with SMA connector. Height of antenna 20 cm. Magnefoot Ø 3 cm.
Reference : 26000986
This fixed button with built-in battery fits 2600.0982 and 2600.0975.
Reference : 20000886
GSM antenna with extra amplification 7 dBi, magnetic foot and 3 meter cord with SMA connector.
In the same category
Reference : 26000952
Remote control with 2 buttons, with wall brackets
Reference : 26000981
Remote control with 4 buttons for 4 channel receiver for item no. 2600.0982, comes with battery.
Maximum 125 remote controls.
Reference : 26000953
Remote control with 3 buttons, with wall brackets
Reference : 26000994
Antenna for 433Mhz universal for all wireless receivers.
Reference : 26000973
Remote control with 1 button, rolling code 433mHz
Reference : 26000956
Remote control with 6 buttons, with wall mount
Reference : 26001001f
RF Wireless receiver with built-in multifunction relay and timer.
It can be set to pulse or ON/OFF and self-hold of 05/10/ or 15 seconds.
(The device is controlled via RF 433 MHz remote control, it is not included but can be purchased as 26000998)
Reference : 26000992
Remote control for 12 channel receiver