This small holding lock is easy to mount and comes with the advantage of but can get a notification about the closet is locked. It must be connected to 12volt DC (100mA). Remember the rubber dial under the anchor plate - otherwise it will have difficulty holding anything at all (see illustration in the pdf file below).
- red + 12V black - Gnd
- white/green - the feedback
Others also bought
Reference : 20001495
Single beam perimeter (photocell), range min. 2 meters and max 15 meters. Side-way adjustable.
Reference : 28000459
Small cabinet lock that can hold 150kg. to 12 volts.
Reference : 28000253
Magnet lock with 280Kg, 12-24VDC
Reference : 41000226
Power supply 12V 4A
Reference : 22008102
The sensor can be set to a sensor distance of 4-10 cm. The device has an LED indicator which partly shows whether the device is powered and whether movement is detected. The exit button requires a 12 V DC power supply. The plate is in stainless steel.
Reference : 41000205
Power supply 12.3-17.2V 1.7A module. Without battery backup. With potentiometer. Dimensions: H 110 x B 110 x D 38 mm.
Reference : 28000516
Magnetic door holder 12/24VDC 150kg for floor mounting with trigger contact.
In the same category
Reference : 28000251
Magnet holding lock - can withstand a pull of up to 180 kg. Stainless steel frame.
Reference : 28000143
Stainless steel lock 500kg. for installation YM-500M-S
Reference : 28000269
Magnet holding lock 750 kg. For indoors
Reference : 28000267
Magnet holding lock - can withstand a pull of up to 500 kg.
Reference : 28000200
Smart magnet holding lock - can withstand a pull of up to 250 kg.
Reference : 28000277
Anchor plate bracket for 28000253 MBK-280I
Reference : 28000275
L-Z bracket for 28000269 750KG. Lock