Keypad w/Mifare reader plastic
Keyopad with Mifare reader and light keys.
Combined Mifare reader and keypad with push buttons. The keypad is equipped with a blue backlight and the key tone.
Robust model, the keypad is waterproof (IP 65) and therefore suitable for both indoor and outdoor installation.
Up to 1000 users on relay 1 - green LED.
Up to 10 users on the relay 2 - red LED.
Access via card / token or code
Relay 1 and 2 can be programmed for the following three forms of access:
- Only access with card / fob
- Access with card / fob or personal code
- Access with both card / fob and personal code (combined access)
The keypad can be programmed with code optional length of between 2-6 digits. By default, you can choose to use the code or card / fob. If you choose to use combined access, then all users must use both code and card / fob for access.
The device keeps track of the cards and fobs in a read distance of up to approximately 5-10 cm.
Can run as ON / OFF or timer
ON / OFF: you must read the card / fob or enter the code to open the door, and then read the card / fob or enter the code to unlock the door.
Timer: Lock activation time can be programmed for 1-99 seconds, then the door locks automatically.
H 120 x W 76 x D 22 mm.
-20 to 50°C
- Reader Interface
- Reader Type
- Keypad + Reader