Outlet - simpal T20 (Slave to model T40)
Product No.: 60000164
Outlet T20 (Slave) Up to 4 slave units can be connected to 1 Master T40 unit. Maximum distance of 30 meters between mast and slave.
kr320.00 tax excl.
The slave outlet uses the GSM signal from the Master GSM outlet T40 via an RF 433.92MHz RF connection. It can be operated via up to 5 user mobile phones - anytime, anywhere. It is possible to purchase a 3M wire item. 6000.0161 so that the thermostat can be placed further away from the GSM outlet.
More cool features
Remote control via mobile phones
The slave outlet is a remotely operated outlet. Plug the T20 outlet into a regular power outlet and remotely control (turn on and off the power transfer) on that outlet.
Timed power on/off hours
It is possible to set the time interval for when the device should turn the power transfer on and off.
Control via temperature sensor
With the included temperature sensor, the outlet can be adjusted to, depending on the measurement of the room temperature, turn the plug on or off. Please note that by overpowering automatic temperature control by an on/off SMS, automatic control will be disabled but can be activated again with a text message.
Message at rapidly changing temperature
A time interval and temperature limit values can be preset. The outlet will then send a text message to the master phone if the room temperature in the preset time period changes so that the temperature exceeds the predefined limit values for the room temperature.
Power failure notification
The outlet can be set to notify the master user via beep sound and SMS in case the device does not receive power. When the outlet recovers the AC, the device will also send an SMS message to the master user.
If you have a problem with a router that needs to be restarted, this can be done. use our app or just send an SMS.
- 1 master user (only this user can via his phone set/programs features)
- 4 other users (can turn the power transfer on/off via SMS)
The outlet is operated via SMS command or at the touch of the button on the device.
The outlet is suitable for controlling electrical appliances where the power consumption is less than 3600W and with a maximum load of 16A.
Devices produced after 2018 are the temperature sensor either an NTC 10k or a digital DS18B20.