Narrow-profile bolt lock for mounting in the door frame.
The lock will be unlocked as long as there is no power on the system.
The lock opens through an access control system, a code keyboard, or an exit button switch. When the door is closed, it locks automatically. When installing, it can be set to have a time-controlled delayed lock of 3, 6 or 9 seconds. On delivery, no delay has been set.
The lock requires a 12VDC power supply.
Consumption: Impulse: 960 mA. Constant: 130 mA.
Time-controlled delayed locking 3, 6 or 9 seconds
- 5 coloured wires:
- Red: plus (+)
- Black: minus (-)
- Orange: Open (end wrap button)
- Green: NO
- White: COM
- Button/exit button: Connect Red and Orange
Unit measuring: H 192 x B 25 x D 37 mm. Bolt: L: 17 mm. Ø12.6 mm.
We can also get the bolt lock in model for 24VDC. However, we do not have these in stock, but can order so far as the order is at min. 100 pcs.
For more information on this, feel free to contact us.
Others also bought
Reference : 28000102
Soyal 12/24V bolt lock for mounting in door frames. The lock will turn off when/if power is interrupted - Fail Safe version. A DIN cylinder can be fitted to the lock
Reference : 41000262
New product in very high quality. Auxiliary print DC for DC, adjustable voltage control module. Voltage up or down simply when adjusting on the pot meter. Should be located in all service cars and toolboxes, for quick fitting.
Reference : 28000163
Mini symmetrical end-of-life electric gaze with adjustable phallus. Locked without tension. Holding force of 400 kg and a list pressure of 16 kg. Can be combined with a push button or some other form of access control
Reference : 20001610
Waterproof, combined code keyboard with proximity reader with 5 cm reading distance - 3x4 keys. Up to 1000 users. Code length 2-6 digits can also use card/piece.
Reference : 22008303
Small stainless steel express button with white light for background plate installation. The button requires 12VDC power supply.
Reference : 22008082
The sensor can be set to a sensor distance of 4-10 cm. The device has an LED indicator which partly shows whether the device is powered and whether movement is detected. The exit button requires a 12 V DC power supply. The plate is in stainless steel.
Reference : 41000209
Power supply 12V 2A for battery backup. This power supply is protected from overcharging as it has a maximum charge flow of 0.5A.
In the same category
Reference : 28000125
Bolt lock for mounting in door frames - Locked with power
Reference : 28000113
Bolt lock with narrow profile for installation in glass door. The lock turns off when the power is disconnected. Requires 12VDC power supply.
Reference : 28000123
Bolt lock for mounting at the bottom of the door. The lock uses 5 amps when unlocking.
Reference : 28000136
Lock for revolving doors - tulip falle, 12-24 DC/AC
Reference : 28000126
Bolt lock for mounting in door frames - Locked without power
Reference : 28000122
Bolt lock with narrow profile for mounting in door frame. The lock turns on when the power is disconnected. Requires 12VDC power supply.