Bolt lock12-24V locked with power
Bolt lock with narrow profile for mounting in door frame. The lock turns on when the power is cut off. Requires 12VDC power supply.
Bolt lock with narrow profile for mounting in the door frame.
The lock will be locked as long as no power is connected.
The lock opens via an access control system, a code keypad or an expression contact. When the door is closed, it locks automatically. During installation, it can be set to have a timed delayed lock of 3, 6 or 9 seconds. Upon delivery, no delay is set.
OBS !! It is thus not possible to close the lock without power. Therefore, it must not be used for emergency exits or places where there is no other exit!
Power consumption: pulse 960mA; Constant 180mA
Time controlled delayed locking: 0/3/6/9 sec.
Dimensions Front of bolt lock: L 192 x W 25 x H 3 mm.
Dimensions Lock body / borehole: L: 192 x W 25 x D 34 mm
Dimensions Bolt: ø 13 mm x L 116 mm
See more specifications in the guide below
Connect red wire + 12VDC
Black wire connected - (minus)
Orange: Exit PB - connected to expression button
Green wire: NO (normal open) - signal to the access control
White wire: COM (common) - connected to access control