Bolt lock 12V locked when energized
Soyal bolt lock - unlocked when the lock is not energized. Ideel for use at fire doors. It can also be used at doors where free access is needed during the day e.g. main entrance at stores or the door to an office.
Bolt lock from Soyal for mounting in the door frame.
The door in which the lock is installed is unlocked when the lock is not energized and is therefore ideel for use at fire doors. It can also be used at doors where free access is needed during the day e.g. main entrance at stores or the door to an office.
The lock can be controlled via an access control system, key pad or push botton. When the door is closed it lockes automatically.
It is thus not possible to leave the door unlocked over a longer period of time unless it is connect to a access control system e.g. SSI 3000, which will be able to control this task.
Another set which gives you the possibility to leave the door open is, if you use our key pad (item no. 20001615). Then you can either open the door via a code and the door will lock 6 seconds after it is closed or you can enter another code and the door will be unlocked until you lock it again.
The lock can when installed be timed to delay relocking with 3, 6 or 9 sek. Relocking delay is not set when delivered.
The lock requires a 12 V DC power or 24 V DC supply.
Current: Impuls: 1, 0 A. Constant: 0,25 A - 12 V DC.
Front of lock: H 200 x W 32 x T 1,5 mm.
Lock body: L 141 x W 32 x D 40 mm
Bolt: L 18 mm, Ø16 mm .
- Tag Type
- Proximity 125Khz