Code keyboard with proximity reader
Call for price
70253010
Waterproof, combined code keyboard with proximity reader with 5 cm. reading distance - 3x4 keys. Up to 1000 users. Code length 2-6 digits can also use card/chip.
Combined 125KHz proximity reader and code keyboard with 3x4 rows of keys. The keyboard is equipped with a blue background light and key sound.
Application
The code keypad can be installed at the door or gate. It is waterproof (IP65) and therefore suitable for both indoor and outdoor installation.
Users
- Up to 1000 users on relay 1 - green LED
- Up to 10 users on relay 2 - red LED
Access via card/tag or code
Relay 1 and 2 can be programmed for the following 3 types of access:
- Only access with card/tag
- Access with card/tag or personal code
- Access with both card/tag and personal code (combined access)
The code keyboard can be entered with a code of any length between 2-6 digits. As standard upon delivery, the code length is set to 4 digits.
On delivery, the code keypad is set, so you can choose to use a code or card/chip. If you choose to change the setting to combined access, all users will have to use both code and card/chip to gain access.
The device registers cards/tokens at a reading distance of up to approx. 5 cm.
Activation time - setting how long the relay pulls
ON/OFF: you have to read the card/tag or enter the code to open the door, and then read the card/tag or enter the code again to lock the door.
Timer: The lock's activation time can be programmed to 1-99 seconds, after which the door locks automatically.
Accessories
All our proximity chips can be used for this keyboard. If necessary, see the "We also recommend" box below.
NOTE : The chip called Mifare proximity chip (item no. 22008165) cannot be used.
The expression switch in pure stainless steel has item no. 22008093. It is also available in stainless steel with red light (item no. 22008093) or in stainless steel with white light (item no. 22008094). The expression function is available on both relays (2 inputs).
Remember to also buy a 12V or a 24V power supply
The code keyboard can use a 12 or 24VDC power supply. The power supply is not included, but can be purchased separately.
The unit measures: H 120 x W 76 x D 28 mm.
The cable coming from the keyboard is grey, 90cm. long and contains 12 conductors.
Instructions for using the code keyboard in connection with the alarm system
There is no reviews yet. Be the first to write us your opinion